Showing results: 511 - 525 of 749 items found.
-
Atec, Inc.
Atec’s Data Acquisition and Control System (ADAQ™) is a modern, full-featured, highly integrated hardware and software solution that is applicable for use with most commercial and military turbine engine test cell applications. Built upon National Instruments’ respected LabVIEW platform, ADAQ™ is robust, versatile, user friendly, and specifically designed to handle the demanding requirements of engine testing. It links seamlessly to digital engine modules (FADECs, DEECs, EECs, ECUs) as well as legacy analog and mechanical controls. Users can create, remove, calibrate and display channels, as well as generate custom calculations, screens and reports. Beyond the most impressive manual throttle control and operation available, Atec’s ADAQ™ additionally offers the option of fully automated testing.
-
OTP2 module no.193 -
LXinstruments GmbH
PXI offers the optimal approach to validation and production testing. You can meet timing, synchronization, and throughput requirements across devices. PXI is a robust PC-based platform for measurement and automation systems, supported by software. PXI combines PCI electrical bus characteristics with CompactPCI's modular Eurocard packaging, and then adds special synchronization buses and important software functions. PXI is both a powerful and cost-effective platform for applications such as manufacturing test, military, aerospace, machine monitoring, automotive, and industrial test.
-
Bloomy Controls, Inc.
The Bloomy Simulation Reference System provides a hardware in-the-loop (HIL) test environment for dynamic, closed-loop testing of many aerospace and transportation control systems. The reference system integrates the computing, I/O, and software components needed for standalone use or to form the basis of a more complex test system.
-
Tessy -
Razorcat Development GmbH
TESSY automates the whole unit test cycle including regression testing for your embedded software in C/C++ on different target systems. As an easy-to-install and easy to operate testing tool TESSY guides you through the unit test workflow from the project setup through the test design and execution to the result analysis and reporting. TESSY takes additionally care of the complete test organization as well as the test management, including requirements, coverage measurement, and traceability.
-
Objective Interface Systems
Objective Interface Systems (OIS) was founded in 1989 with the goal of providing products that enable customers to build vastly superior information systems and technologies.OIS's products allow the system and software engineers to assemble flexible systems with incredibly agile communications infrastructures.The products enable real-time, embedded, and high-performance systems based on standards-based communications infrastructures on a wide variety of deployment environments. These tools result in systems that are more flexible, reliable, predictable, and correct than what was previously possible. OIS products are the Heart of Communications.OIS provides the most reliable products available. Every OIS software engineer is trained in DO-178B safety-critical engineering processes, Software Considerations in Airborne Systems and Equipment Certification. This well-established process standard arguably provides the best method for achieving high-correctness in engineering processes. Every line of OIS product source code goes through an arduous multi-person peer review and requirements traceability analysis. Critical sections get even more scrutiny. Every product build goes through automated regression testing and verification by a group independent of the developers.
-
Dr. Brockhaus Messtechnik GmbH & Co. KG
Electromagnet systems with different power levels to produce homogeneous magnetic fields. Usable for calibration of sensors, testing of magnet systems and Hysteresis measurement. Adjustable air gap from 0 up to 60 mm. Field strength in the air gap up to 3 Tesla. Software program for control and evaluation.
-
Fiberizer™ -
VeEX Inc.
Software solutions for remote optical testing and data post-processing for managing test data and generating reports that integrate OTDR, link map, GPS coordinates, OLTS (loss and ORL), connector inspection, and captured images. Available for Window PC, Mobile Apps (Android, iPhone and iPad devices) and Fiberizer Cloud.
-
CH2 -
Cirris Systems Corporation
The easy-wire CH2 was designed for commercial, military, and aerospace applications. Running on powerful Windows-based software, the CH2 offers unrivaled testing capabilities at an unparalleled price. Compact, easy-to-use, and FAST (shorts/mis-wires detected in <1 sec for 20,000 points), the CH2 is positioned to become the ''''tester of choice'''' for high-end users.
-
METRISO® 3000 -
Wolfgang Warmbier GmbH & Co. KG
Suitable for resistance point-to-point and resistance to ground measurementsIntegrated data logger with USB communication port for data transmission (50.000 test values). The supplied Report Generating Software ETC allows to generate a complete test reportA barcode scanner can be used in order to record measurement points before testing
-
Electron Plus
The ASA200 Analog Signature Analyser will assist you in testing, diagnosing and troubleshooting printed circuit boards without powering them (known as ‘power-off testing’).Connected via USB to a compatible PC running our own free software the ASA200 you can easily capture, measure and compare known good signatures (from your ‘golden’ board) with signatures from your suspect board. The built-in gate/bias generator (+/-10V, 100ohm source impedance) can be used to help test active components such as SCR’s, opto-couplers, small relays, TRIAC’s etc. An external dual footswitch can be connected to the ASA200 and can be user configured to control various functions.With the ASA200 we set out to bring the incredibly powerful technique of Analog Signature Analysis to engineers and repair shops at an affordable price.
-
RFCI61000-4-6 -
Lisun Electronics Inc.
RFCI61000-4-6 RF Conducted Immunity Test System is an automatic test system which is for the conduction sensitivity testing, it is fully meets IEC61000-4-6.2006, ISO11452-4, GB/T17626.6-2008 and GTB152B-CS114 etc standards. RFCI61000-4-6 internal source and broadband power amplifier can be generated 3 voltage test levels: 1v, 3v and 10v, and has the function of the real detect output level. It has two operation software which is calibration software and test software. When measuring, the signal is in 1 KHZ sine wave amplitude modulation system (80%) to simulate the actual harassment, and can through the coupling/decoupling network (CDN or electromagnetic clamp) to make the harassment signal coupled to the device.
-
Iterators Software Testing
Iterators is a Trusted Tester (TT) certified by the Department of Homeland Security (DHS) TT provides a code-inspection based test approach for determining software and website conformance to the Section 508 standards. Companies have their websites tested to ensure they are useable by individuals who have disabilities, such as low vision, no vision, color blindness, hearing loss or impairment, motor or developmental disabilities, elder status and light-induced epilepsy. Iterators has all the knowledge and tools to perform the testing and reduce your business impact due to a nonconformance.
-
Zetec, Inc.
Zetec is the industry leader for cost-effective eddy current testing in complex applications. We have the most extensive experience, and we develop the highest quality ECT inspection products. When it comes to understanding your needs, we’re your trusted advisor. And from instrumentation to probes to software, you can count on us to provide a complete inspection solution that will help you realize a cost savings in the long run. etec Eddy Current technology and products provide a fast efficient solution for near surface anomalies in conductive material
-
BAT -
ADVINT, LLC
• NI PXIe Based Platform for Radar/EW Test- Leverages a Variety of NI FPGAs/VSTs/Upconverters up to 44GHz- LabVIEWTM and LabVIEWTM FPGA Software Environment• Provides PDW to IQ Generation• Multi-Emitter System- Faster Simulation Setup- More Complex Scenario Testing- Ease of Changing Scenarios• Supports Multiple PDW Formats- Simple, Built-In PDW Format- Industry Standard PDW Formats (e.g., NEWEG)- Custom PDW Formats• PDW Data Accessible via Stored Files, or Live Streaming• Factory to Field Deployable
-
imc Test & Measurement GmbH
We develop modern and flexible test stands for research, development and production. In doing so we exclusively use our own in-house imc measurement hardware and software platform that has become established in the testing market worldwide. Our experienced “customer solutions team” is at your side during all phases of project development: from planning and construction through to configuration and implementation phases. We are also more than pleased to support you in modernizing and retrofitting existing installations and protecting your investment in the future.
